Monday 3 December 2007

Yacht under construction - For Sell


" THE BO "

The Bo is all about comfortable cruising and personal privacy. All too many yachts of this size are designed without enough consideration given to crew and guest separation. This owner/crew proximity can be irritating for both groups. The Bo addresses this problem in several ways. Firstly, there are two steering positions.
If the yacht is being used under power only, there is no need to have a crewman aft where the guests might be enjoying themselves. The forward steering position is in a self contained wheelhouse which leaves the deck saloon private for guests. Even if the yacht is under sail, the forward wheelhouse can shelter those crew who have no need to be on the aft deck. Furthermore there is a unique, sheltered, recreation cockpit forward of the wheelhouse where the crew can relax at any time, at sea or at anchor.


Secondly there is never any need for the crew and guests to bump into each other even inside the yacht. There are three ways for the crew to access their own quarters, and to give deck and cabin service. They have their main companion from their own forward cockpit; A separate staircase from the forward wheelhouse to the pantry, galley, and foc’sle; and access from the laundry directly into the lobby serving the three forward guest cabins.








If the stewardess wishes to access the owner’s cabin aft, and the guests are occupying the main deck salon, she has access, without being seen, via the port guest cabin and shower room.
This has been set up with two entrances/exits to satisfy MCA, which also allows this bathroom to serve as an occasional day toilet for visitors without having to enter a cabin. The forward wheelhouse doubles as a deck pantry, with a food lift from the galley. The port and starboard wheelhouse doors allow food and beverage service to the outside dining area without having to disturb any guests in the deck saloon, perhaps watching a film. Cabin service is given in the same discrete manner to all four double cabins.



The cabin accommodation is exceptionally comfortable. The master cabin is aft, in the place of least movement. It has a king sized double bed and identical “his” and “hers” bathrooms. The desk to port can double as a dressing table. It will also take charts, and have GPS and wind instrument repeaters. There is a generous sofa to starboard for napping, or taking a meal in the cabin. Plenty of clothes storage, and an attractive library arrangement.



The three spacious guest double cabins all have large en suite bathrooms. All are about the same size, and very generous for this size of sailing yacht. Each guest cabin has a Pullman berth for extra guests, or children, bringing the total number of guests beds to 11. Each cabin has its own radio, music, and the largest flat TV screen it is possible to fit. The deck salon is approx 27 sq meters. The expanding dining table can comfortably take all guests if it is too cool to eat outside, or for watching a film on the large, flat, concealed TV screen. The deck saloon is fitted with the usual bar, drinks fridge, and ice maker, etc.

A nice feature is the excellent visibility from the deck saloon, somethingwhich is often missing from the flush deck, low profile yachts. The crew accommodation is comfortable for a total of 6 in three spacious double cabins. There is a very adequate crew mess with music and TV. The heart of a successful cruising yachts is the galley.


On the Bo it is surprisingly large and professional, with food lift to the wheelhouse. The Bo is also configured to be a professional charter yacht. On a top of the line charter yacht, laundry becomes very important. It is also the worst job on the yacht. The Bo has a real laundry with commercial washer and dryer and enough space and equipment for high quality pressing in humane conditions. The décor throughout the Bo (crew quarters included) is very classic.

Mat white paint with French polished mahogany trim. Colour comes from curtains and covers. Due to ample use of skylights and deck prisms, the atmosphere is very light and cheerful. Impossible to feel miserable in this setting. All interior floors are cork. Good looking, non slip, comfortable for bare feet, and a renewable material. Great attention has been paid to plentiful natural ventilation, as well as the full air-conditioning from Condaria.





The Bo is very well equipped mechanically. Caterpillar 3406C diesel main engine. New state of the art Bruntons folding propeller. Powerful bow thruster. This main engine is the heavy duty version, down rated from a maximum possible of some 700HP, to just 400 HP. It can be run continuously at maximum RPM for long periods. The electrical demand is satisfied by two Northern Lights generators, of 33KW and 55KW.

A SaniMarine toilet system is connected to a Hamman Wassertechnic sewage treatment plant. Two Idromar water-makers have a total capacity of some 9,000 litres per day. Only one will be needed for the ship’s requirements, giving good redundancy back-up. A shortage of water can ruin a cruise.

There is a full range of communications and navigation electronics. Satellite radio and TV, full internet access, etc. For the most part, the engine controls, navigation aids, radar, electronic charts, etc, are duplicated both in the wheelhouse and the aft steering position. The owners have put a lot of thought into how they are going to use their yacht. They have assumed that she will spend most of the time being used in a good weather zone and most of the guests’ time will be spent on the upper deck level, either in the deck saloon or in the large, sheltered, outside sitting/dining area.


This is covered by a permanent awning that stays up all the time, even when sailing in a strong wind. The sides can be dropped down, as required, to protect the occupants from wind and spray if the weather is cold, or the wind uncomfortably strong. Sun bathing takes place on the raised area immediately behind the shaded sitting/dining area, and has fitted mattresses. There is plenty of other deck space for loose mattresses, even the deck saloon roof.


For swimming, and access to the water and tenders, the Bo has a unique bathing platform which lowers down from the deck under the transom, on the centre line. Very neat, clean, and practical. There is also the traditional ships’ side companion to starboard, and a ladder for the crew to port.



High tensile steel was chosen for the hull material. This was chosen over GRP and aluminium for strength, simplicity, and ease of repair worldwide. Steel gives the possibility of fitting really large tanks within the structure. The superstructure is in marine grade aluminium for light weight, strength, and it’s anti-corrosion qualities. All areas where rust is the traditional enemy are in stainless steel. The lead ballast is hot poured into the heavy steel keel casing to ensure that the ballast weight is as low and as dense as possible, giving maximum stability for a given displacement. The lead ballast is sealed in special oil to eliminate any chance of internal corrosion. The combination of low lead ballast, powerful rig, and high tensile steel hull, guarantees that the ratio of sail area to displacement will produce a sail boat that will perform well in all weather conditions.

An additional bonus of running in hot lead is that the low down top sealing plate becomes the bottom of the tanks with a beneficial affect on the CG. The powerful ketch rig has been chosen for ease of handling. The 155 sq m (1,668 sq ft) mainsail is set within lazy jacks, and the mizzen rolls into the boom. It is expected that even in a strong wind, it will seldom be necessary to take in more than one reef in the mainsail. The large rudder is set as far aft as possible to allow the yacht to sail comfortably, and steer easily in stronger winds, with just a headsail and the mizzen set – no mainsail in use.

Another advantage of the ketch rig, together with a strong mast, is that running backstays are not required, reducing the clutter of winches on deck and making tacking much easier. Top of the line Bamar furlers, and Harken winches have been used everywhere.


Good tenders are essential for satisfactory cruising.

The Bo is exceptional in this respect carrying 2 x 4.3m diesel, waterjet RIB’s from Castoldi. Stowage is available for two wet bikes as well, should an owner wish to carry them. Windsurfs, etc, can be carried on the deck saloon roof, or even in the aft peak. The idea of two good tenders is to allow anchoring well away from any ports. If the crew have to take a tender ashore, and are away for several hours, the owner and guests are not stranded on board, and vice versa. The tenders themselves are large enough, and have enough range, to be used for real excursions/ side trips


They could leave the mother ship at one anchorage, and meet her again in a different anchorage as much as 30/40 miles away from where one started. The tenders are stowed on the foredeck, and in davits aft. Either one qualifies as a rescue boat for MCA. Good anchors, and excellent anchor handling, are also vital to satisfactory cruising.

The Bo has taken a lesson from some of the most successful American yachts, and has opted for two large CQR anchors slung under the bow-sprite. This means no awkward hawse pipe anchor stowing, or complicated in/out devices. More space is left for truly self stowing anchor chains. A powerful Muir anchor windlass takes care of the anchor hauling. There are Muir warping drums on the aft deck, and of course the Harken sheet winches can be called in to help with spring lines, etc. Storage is essential for serious long distance sailing.


The Bo has a huge storage volume for a yacht of her size. There is a vast storeroom, easily large enough for extra deep freezers, spare parts, and much more, under the crew quarters. There are large, dry bilge storage areas under the forward guest cabin lobby and owner’s cabin lobby. Both these areas can take a lot of luggage, gear, and stores. There are more large stores, port and starboard, under the deck outboard of the crew cockpit.

These are accessed thru flush deck hatches. Similar under deck spaces further aft are accessed from the interior. Even more space is available in the aft peak, although a part of this is lost to the stern bathing platform and its mechanism. There is a generous fore peak too. An unusually large linen store is situated in the forward guest lobby. This is suitably divided for linen, heavy weather clothing, etc.

With new oil discoveries forecast to peak in 2013, and oil reserves expected to steadily decline from this time onwards, fuel prices will climb to highs never seen before. Sailing yachts such as the Bo 40 reflect a concerned and responsible attitude towards fossil fuels, pollution, and renewable energy, at the same time providing the most satisfaction that real yachting can offer.



They are the Marine «Hybrids».
Bo main characteristics.

Length overall. 40.00 meters.
Beam. 7.45 meters.
Draft (full load) 3.55 meters.
Sail area. 540 sq meters.
Fuel capacity. 16,000 litres.
Water tanks. 7,700 litres.
Grey water tank. 2,500 litres.
Displacement full load. 172 tons
Main engine: caterpillar 3406C 400 HP continuous.
Generators: Northern Lights. 33 and 55 KW.
Water-makers: 2 X Idromar. Total 9,000 litres per day.
Tenders: 2 x Castoldi diesel RIB’s.
Builder: Bod-Yat: Antalya.

Classification: RINA 100 AI yacht: Full MCA compliance.
Naval Architecture and interior design:
Studio Scanu.

Yachting with renewable energy is the thinking mans’ choice.

Saturday 3 November 2007


Sunday 19 August 2007

WELCOME TO BOD-YAT INTERNATIONAL A.Ş.

BOD YAT A.Ş., is a growing luxury yacht manufacturer.
We manufacture world quality wood, composit, aluminum, steel, and GRP luxury yachts.
The two boat yards in Antalya and Bodrum, Turkey, and have exclusively built for customers in Europe, particularly from Italy.
Bodyat was established in 2002 by Ahmet Epikman and Mustafa Nalbantoğlu. The firm has two shipyards one in Bodrum , the other in Antalya.
Bodrum Yard
The yard is consist of 4048.85 m2 and there are two hangars with a total closed area of 2.000 m2. Production capacity of the yard is one 40 meter,one 35 meter, and one 15 meter sailing or motoryachts at the same time. It is equipped with carpentary, painting, and electric workshops, a warehouse, administrative offices, and design offices.

Antalya Yard

The yard is located in the Antalya Free Trade Zone. It went into operation in 2006. This yard is placed on 6008 m2, with total closed area of 4.816 m2.

There are two hangars within the yard. The production capacity is 7-10 yachts at the same time depending on their lenghts, between 25-45 mt.
It also holds carpentary, painting, electric workshops, a storehouse, administrative offices, and design offices. There are two crain winches on both hangars. The installations are totally owned by Bodyat.



History

The company began its operations in 1983 under the name Tussock A. S., offering sailing yacht cruises in the Aegean and the Mediterranean.

It has started with two 21 meter boats and reached to a fleet of 9 boats in 1997, fully owned by Ahmet Epikman and Mustafa Nalbantoglu, who are the founders, owners, and co-managers of the company.

Presently, Tussock A.S. serves an average of 2000-2500 European customers every year, from offices in Holland and England. Fleet rests in Bodrum, Turkey.

From the need to maintain and repair the fleet, has eventually evolved a boat yard in Bodrum, Turkey in 1993, and another one in the Free Trade Zone in Antalya, in 2005.
Bodrum boat yard operates on 4048.85 m² with a covered space of 2000 m². The Antalya boat yard rests on 6008 m², with a covered space of 4816 m².

A. Description
Executive Board: The three partners of the firm: Ahmet Epikman, Mustafa Nalbantoglu, and Dr. Turgut Sahin (Chemical Engineer)
Assistant General Manager: Hakan Debbag, (Management Specialist, Finanace)
Manager: Purchasing and Materials Management: Kaya Tumer (Naval Architect)Manager: Finance and Accounting: Hakan Debbag (Acting)
Manager: Human Resource and Administrative Affairs: Hakan Debbag (Acting) Director Communications: Meltem Ozer
Boat Yard Directors: Ahmet Talu (Architect) (Acting) Assistant Boat Yard Directors, Project Engineers, Warehouse Manager
B. OwnershipOwners are, Ahmet Epikman, Mustafa Nalbantoglu and Dr. Turgut Sahin, a chemical engineer.
C. Board of Advisors General Advisor: Riza Sitki Karahan, Ph.D., Professor,
International Business and Marketing
Technical Advisor: Ahmet Talu, Architect

Wednesday 27 June 2007

Yachts for sale

OSETRA 13 mt. Tırhandıl - Second hand for sale





MANDALINA - 19.9 mt. Tırhandıl - New Brand For Sale



M/S MANDALINA WOODEN YACHT
TECHNICAL SPECIFICATION


Builder: Bodyat A.S.
Bodrum / Turkey


A. General Particulars:
Length Overall 19.90 m
Length Waterline 18.60 m
Beam, molded 06.50 m
Draft 02.40 m
Displacement 67.65 t
Ballast 6 t
Construction, hull Wood
Construction, superstructure Wood
Diesel Tank 3000 lt
Water Tank 4000 lt
Greywater Tank 1200 lt
Blackwater Tank 1000 lt


B. Description:
Traditional wooden tirhandil with modern interior line and equipment range.


C. Construction:
Materials
Wood
All wood clear of checks and air dried between 12% and 18% max moisture
content. Plywood marine type. Joinery woods as specified elsewhere.
Stainless Steel
Type 316 or 304 stainless steel.
Fastenings
Stainless steel or galvanized on the hull
Hull Structure
Traditional carvel planking with special type of marine environment resistant
type of red pine.
Deck Structure
Marine plywood and Iroko wood glued with Sikafleks 298 and sealed as
5 mm x 5 mm with Sikafleks 290 DC polyurethane based UV resistant marine
products.
Bulkheads
Spruce structure closed with marine plywood on each sides and Sapelli
mahogany decorative veener coated on the both surfaces, 52 kg/cbm
density rockwool used as insulation.
M/S Mandalina Technical Specification Page 3
Soles
Soles are constructed with Sapelli mahogany wood.



D. Ballast:
Total 6 tonnes of ballast keel securely fastened to the wooden keel of the hull with
Sikafleks 290 DC polyurethane mastic and 25 mm diameter galvanized steel bolts bolted
on every 600 mm distance. Ballask keel consists of one steel (ST 37) keel box and iron
pigs which are fixed with epoxy cement inside.


E. Closures:
Portlights
Stainless steel portholes with taugtened glass are fitted to the coachroof.
Windows
Stainless steel framed taughtened glass windows are fitted on the
superstructure, two of the side windows are electrically openable.
Doors
All deck doors are made by shipyard with Sapelle mahogany wood.
Weathertight hatches
Two Bofor weathertight aluminium hatches are installed.


F. Rudder and Steering:
Iroko wood rudderblade with stainless steel bearings, DATA DDS 460 24V electro
hydraulic steering system is installed. Steering will is stainless steel.


G. Tanks and Systems:
Fuel
Two steel side tanks in the engine room, valves are chromed brass, hose CE
approved, filters single separ.
Water
Galvanized steel tanks in the bilge, valves are chromed brass, pipes
polyprophylen, pressure system 24V CEM pump with integrated stainless
steel pressure tank.
Water heater, 230V electrical horizontal boiler.
Vitra ceramic sinks in the bathrooms and inox sinks in the galley. Shower
and sink tabs are Artema. There is one deck shower.
Black and Grey Water
Polyester tanks in the bilge. 230V electrical macerator are installed. Valves
chromed brass and pipes PVC.
Bilge
One engine driven bilge pump and 2 Rule 24V 2000 GPH bilge pumps with
two floating switches. Valves chromed brass and pipes galvanized steel and
hoses transparent wire framed plastic.


H. Machinery:
Main propulsion
Engine – Daewoo L086 TIH 285 HP 2100 rpm
Transmission – Dong-I with at 3.03:1 ratio
Propeller
Turkish made 93x74 mm Al.Bronz 4 blades
Shafting
316 Stainless Steel shafting with Ermaksan deep sea seal.
Engine Control
Single station mechanic control system
Gen-Set
Deutz 230V 21 kVA with L. Sommer alternator and sound shield.
Exhausts
Main engine – Wet exhaust system, Vetus
Gen-Set – Wet exhaust system, Vetus
Seachest
Engienroom mounted with Vetus strainers, with full flow bronze thru hull
fittings.
Ventilation
Air forced exhaust ventilation with double aluminium body blowers.
Air Conditionin and heating
Central chiller system with fun coils, all funcoils have own digital control
panels. Heating will be supplied with same system.


I. Insulation:
52 density rockwool in the bulkheads and ceiling of the superstructure.
In the engine room 52 density rockwool and perforated aluminium plates are covered.


J. Deck Accessories:
Windlass
DATA DZÇ 1002HKS-12K hydraulic horizontal windlass with double gypsies
for 12 mm chain and two drums for mooring ropes.
Anchor system
M/S Mandalina Technical Specification Page 5
Stainless steel anchor pipes to accommodate two galvanized steel 120 kgs
anchors on bow.
Cleats and bollards
2 wooden bollards at bow and 1 wooden bollards at windlass and 2 wooden
bollards at stern.
Rails and Life lines
Stainless steel stanchions with stainless steel wire life lines and wooden
hand rails, one pushpit at stern boarding platform
One wooden flagstaff at stern.
One deck wash outlet at bow.
One stainless steel boarding ladders
Sunbathing cushions on the coachroof
Sun awning at stern deck


K. Electrical:
Electrical wiring
To marine standards
Electrical Panel
AC panel with Siemens or similar components
DC panel with Siemens or similar components
Batteries
2 Main Engine starting batteries
1 Generator starting batterie
1 900 AH Stationary battery group
Battery charger
1 Mastervolt Colorado 24V 100A
Inverter
1 Mastervolt Sinus 24V 2500W
Converter
1 24V to 12V
Lights, domestic
24V golden finished spot lights and chrome finished wall lights
Lights, navigation
24V bow, stern, port, starboard, masthead and 2 spreaderlight
Lights, other
Searchlight Jabsco, flourescent engine room light, bilge lights.
M/S Mandalina Technical Specification Page 6
Horn
AFI air horn


L. Appliances:
Entertaintment systems
TV LG Lcd
Stereo Sony
Galley Equipment
Freezer, Bosch KTG 14N10
Fridge, Ugur 100 lt
Ice maker, Kale 15l/day
Owen, Bosch HBN 230250
Cooker, Bosch NGT 615 T
Microwave, Bosch HMT 812C
Aspirator, Bosch DHI 645 D


M. Safety System:
Safety Equipment
Liferaft, Arimar, 8 person container type
Flares, 6 pcs
Parachute red, 2 pcs
Smoke, 2 pcs
Life jackets with light, adult 8 pcs, children 2 pcs
Horse shoe life buoy, 2 pcs
Fire prevention
Automatic fire extinguisher 6 kg, one for engine room
Fire extinguisher 6 kg, two for saloon and galley
Fire extinguisher 2 kg, four for cabins


N. Navigational Electronics:
Raymarine C120 Display
Raymarine 2kW Radar
Raymarine GPS Chart Plotter
Raymarine ST60+ Tridata
Raymarine ST60+ Wind System
Raymarine Ray 54E VHF
M/S Mandalina Technical Specification Page 7
Cabling ready for Autopilot, mini-m and trackphone


O. Interior:
Three guest cabin with bathroom, one crew locker with bathroom, one low saloon, one
saloon. Satin varnish finishing on sapelli mahogany walls and floors, and OASIS OAA602
bamboo veener ceiling. Spring beds and grey foam cushions.


P. Sail and Rigging:
Mast and boom, Epoxy laminated spruce mast and boom
Sails, UK Halsey Dacron cruising cut sails; Roller Genoa, Roller Staysail and Main
Sail.
Admiral R54 and R45 mechanical furlers
Admiral 2 pcs St66 and 2 pcs ST46 stainless steel winches
Admiral blocks and rails


R. Painting:
Hull
Jotun epoxy primer
Duratek epoxy filler
Standox top coat
Jotun Antifouling
Superstructure
International Goldspar Satin Vanish
Inside hull
DYO primer
Interior
International Goldspar Satin Vanish
International Polyurethane Lacquer Paint


Q. Miscellaneus:
Compass, plastimo offshore 105, Charts No: 224, 311 and 312,.

Sunday 17 June 2007

Studio Scanu


Welcome to the web site of Studio Scanu, the yacht architecture firm that I started in 1983 and that I am proud to manage, together with a talented handful of carefully selected colleagues.


Studio Scanu srlThe Yacht Architects, since 1983Viareggio, Italymail@studioscanusrl.191.it

Thursday 24 May 2007

White Soul

Name: White Soul
Port and Flag:
London - UK
Type: Motor Sailor Gulet
Rig Type: Schooner
Construction material: Wood
Construction Method: Cold Moulding with Epoxy Resin
Classification: Rina 100 A1.1 Y CCL (Charter Class) Unrestricted Navigation
LOA: 35.84 m
Ldeck: 33.80 m
Breadth:8.30m
Depth: 4.38 m
GRT: 180











Friday 18 May 2007

Growth sector

In the last few years, increasing numbers of luxury superyachts are constructed in Turkish yards. This is leading buyers, brokers, and designers to consider Turkey as a luxury superyacht builder country.

BUSHIDO: M/S Bushido has been featured in the Boat International Magazine, October 2005, pp. 118-122.


M/S BUSHIDO-2004 (Length:33 mt)

Thursday 10 May 2007

BOD -YAT IN PRESS - BOAT INTERNATIONAL MAGAZINE




M/S BUSHIDO, one of our latest productions, has been featured in the Boat International Magazine, October 2005, pp. 118-122 http://www.bodyat.com.tr/press.html
M/S BUSHIDO, Designer; Paolo Scanu http://www.studioscanu.com/






Sunday 6 May 2007

Business Description - An Overview of the Industry TURKEY

Turkey is virtually a peninsula surrounded by sea from all three sides, presenting a perfect location for yachting and boat building.

As of the end of 2005, 300 firms had declared to manufacture boats in accordance with the Crusing Boats Regulation. All exporting firms have been operating under this regulation since 1998 as the EU Directive, which is the source of the regulation, has been in effect since 16/06/1996. As such, all boat manufacturing since then has been made under the CE Harmonization Code, ensuring customer protection, safety, and quality in boat manufacturing, and significantly increasing the exports of yachts to the EU markets.

The 2007 – 2013 Central Plan prepared by the State Planning Organization has adopted the following strategic objectives and principles relevant to the yacht manufacturing industry: (State Planning Organization. IX. Development Plan, 2007-2013)

· To increase the number of marinas, and enhance the structure of the boat-building sector in a way to increase its competitiveness in international markets
· To develop the yacht construction and maintenance infrastructure
· To make sure the international certificates of quality such as the CE Harmonization Code is adopted by yacht manufacturers
· To promote yacht manufacturing and marina construction
· To enhance administrative regulations, and establish the port authority as the one-stop office to handle all paperwork, to attract foreign yachts
· To address infrastructure deficiencies in the yacht and marine industry, and emphasize training and development programs in the sector; within this context, to address skilled workforce deficiencies in the cruising boat manufacturing industry by opening new vocational schools for yacht electricians, carpentry, etc.
· To encourage the establishment of specialized yacht manufacturing sites with complete infrastructure to enhance the international competitiveness of boat manufacturers
· To cut down the red tape in the importation of raw materials and components
· To apply tax exemption to imported components and spare parts that are designed to be used in yacht manufacturing
· To adopt export promotion measures to enhance yacht manufacturing for exports

Yacht ports that will be tendered in Turkey following the completion of the environment approval procedures are as follows:

Cost ($ million) Capacity (yachts)

Marmaris-Adaagzi (Yalancibogaz)/Mugla 15 500
Seferihisar (Urkmez)/Izmir 15 300
Gundogan village/Mugla 15 200
Cesme-Sifne/Izmir 15 500
Karadeniz Ereglisi/Zonguldak 15 200
Karaburun/Izmir 15 200
Yenifoca/Izmir 15 350
Oren/Mugla 15 250
Silivri/Istanbul 15 350
Ilica/Izmir 15 180
Sinop 15 100
______________
http://strategis.ic.gc.ca/epic/site/imr-ri2.nsf/en/gr-01965e.html#a12 U.S. Department of Commerce (STAT-USA/Internet Industry Sector Analysis – Turkey


(The folowing section is adopted from “The International Boating market, Opportunities for Maine,” Maine International Trade Center, May 2005)